Vehicle, electricity, mounting

✓ Used as connectors line and installation line.
✓ Nominal cross section conductor: 25mm²
✓ Outer diameter approx 9 mm

✓ Används som koppling och installationsledning
✓ Ledarens nominella area: 25mm²
✓ Ytterdiameter c:a 9 mm

✓ Cable available in several different lengths and colors
✓ 1,5mm² - 4,0mm², sold by the meter
✓ Black, red, green, yellow et.c

✓ Round flexible cable for car and boat applications
✓ Nominal cross section conductor: 2,50 mm²
✓ Outer diameter approx 10,6 mm

✓ Re-usable lever-operated connector
✓ 0,08 - 4 mm^2t
✓ Service temp max 85C

✓ Multi-tool: press tool, cutting tool, scaling tool and screw cutter
✓ One-handed cable clamp
✓ Peels and cuts, among other things, all RKUB

✓ Nominal cross section: 0.5-1.50 mm²
✓ Tinned copper
✓ Short sleeve

✓ Several different sizes
✓ For vehicles, machines, workshops et.c
✓ Good flexibility with protection for electrical wiring against moisture, dirt and mechanical damage

✓ Used as a connection cable
✓ Nominal conductor area: 0.75 mm²
✓ Outer diameter approximately 6.9 mm

✓ 99,9% pure copper
✓ For stranded wires
✓ Nominal cross section: 25 mm²

✓ Nominal cross section: 25 mm² 
✓ 99,9% pure copper
✓ Up to 200 degrees C

✓ Nominal conductor area from / to: 2.63 - 6.64 mm²
✓ Cable lug in tinned copper
✓ Short sleeve shape

✓ Used as connection cable
✓ Nominal cross section conductor: 1,50 mm²
✓ Outer diameter approx 8,9 mm

✓ Round flexible cable for car and boat applications
✓ Nominal cross section conductor: 1,50 mm²
✓ Outer diameter approx 11,5 mm

✓ Used as connection cable
✓ Nominal cross section conductor: 0,50 mm²
✓ Outer diameter approx 8,8 mm

✓ Used for i.a encapsulation, protection and moisture sealing
✓ Inner diameter in mm: 3/6/9/12/19/24/40
✓ Shrink rate 3:1

✓ Nominal cross section: 2.63 - 6.64 mm² 
✓ The joint is pressed and shrunk with a hot air gun
✓ For completely waterproof splicing

✓ Nominell ledararea från/till: 1.04 - 2.63 mm² 
✓ Skarven pressas och krymps med varmluftspistol
✓ För helt vattentät skarvning

✓ Nominal cross section: 0.5-1.65 mm² 
✓ The joint is pressed and shrunk with a hot air gun
✓ For completely waterproof splicing

✓ Nominal cross section: 2.63 - 6.64 mm²
✓ Tinned copper
✓ Short sleeve

✓ Nominal conductor area from / to: 2.63 - 6.64 mm²
✓ Cable lug in tinned copper
✓ Short sleeve shape

✓ Nominal cross section: 1.04-2.63 mm²
✓ Tinned copper
✓ Short sleeve

✓ 99,9% pure copper
✓ For stranded wires
✓ Nominal cross section: 25 mm²

✓ Nominal cross section: 1,04-2,63 mm²
✓ Tinned brass
✓ Long coppersleeve

✓ Nominal cross section: 1,04-2,63 mm²
✓ Tinned brass
✓ Long coppersleeve

✓ Nominal cross section: 1.04-2.63 mm²
✓ Voltage max: 300V
✓ Brass

✓ Nominal conductor area from / to: 1.04 - 2.63 mm²
✓ Cable lug in tinned copper
✓ Short sleeve shape

✓ Nominal conductor area from / to: 1.04-2.63 mm²
✓ Cable lug in tinned copper
✓ Short sleeve shape

✓ Nominal conductor area from / to: 0.5-1.65 mm²
✓ Cable lug in tinned copper
✓ Short sleeve shape

✓ Nominal conductor area from / to: 0.5-1.65 mm²
✓ Cable lug in tinned brass
✓ Short sleeve shape