Equipment for dealing with broken bulb warnings
Tools for dealing with CANBUS
In some modern cars there are systems that monitors the bulbs in your car. The car will know when a bulb is broken by a decreased power consumption. Unfortunately, when replacing the original incandescent lamp with a LED-bulb, there will be a decreased power consumption since LEDs are so power effecient. Thus, the car will think that the light is broken while it actually still works. One way to solve this problem is by adding extra resistance, so the power consumption increases, "fooling" the car to think that the original incandescent lamp is working again.
-
Warning canceller for LEDFrom €15.90 €12.72
✓ Removes Error Messages (Canbus) when switching to LED
✓ Compatible with eg LED 9G and 11G Xtreme
✓ Plug & Play - Connects between the bulb and the car's connector -
Resistance cable, 12V 5W (1 pair)In stock€13.90 €11.12✓ Resistance cable including mounting details and manual
✓ Used to "fool" the CANBUS-system where a 5W bulb has been replaced with a corresponding diode-bulb
✓ Supplied in pairs -
Resistor 12V, 21WSoon in stock€12.90 €10.32✓ 20W increased consumption
✓ Easy to connect with supplied quick-connectors
✓ Removes indication of broken bulb -
Resistor 12V, 21W, for H11, H8, H9In stock€13.90 €11.12✓ H8/H9/H11 socket
✓ 20W increased consumption
✓ 'Disables' the broken bulb-warning -
Resistor 12V, 21W, for HB3, HB4, H10 (9005, 9006)In stock€13.90 €11.12✓ HB3, HB4, H10 (9005, 9006) socket
✓ 20W increased consumption
✓ 'Disables' the broken bulb-warning -
Resistor 12V, 21W for H7In stock€13.90 €11.12✓ H8/H9/H11 socket
✓ 20W increased consumption
✓ 'Disables' the broken bulb-warning -
Warning canceller W5W/T10 (12V)In stock€9.90 €7.92✓ T10 / W5W pre-mounted sockets
✓ Adds 3W extra consumption
✓ For 12V only -
Resistor corresponding to 10W bulb (12V)In stock€7.90 €6.32✓ Installed to remove broken light warnings
✓ Equivalent to 10W (reverse light, position light, license plate light)
✓ One resistor per bulb is required -
Warning canceller for LED license plate kit, VW and SeatIn stock€9.50 €7.60✓ Fits a range of models from VW, Seat
✓ No more CANBUS-error message
✓ 12 months warranty -
Warning canceller for LED license plate kit, AudiIn stock€9.50 €7.60✓ Fits a range of models from Audi:
✓ No more CANBUS-error message
✓ 12 months warranty -
Osram 5W-resistor, 12VIn stock€21.90 €17.52Save €0
Save €0
✓ High quality resistors from Osram
✓ Three year warranty
✓ Sold in pairs -
Warning canceller, 12VIn stock€10.90 €8.72✓ Warning cancels for cars with light monitoring
✓ Intended for xenon kit
✓ Only for 12V -
Warning canceller for Volvo, BMW, Audi, MercedesIn stock€14.90 €11.92✓ Warning canceller for Volvo, Audi, BMW and Mercedes
✓ Removes any error messages
✓ Plug 'n' Play -
EMC decoder for LEDFrom €13.90 €11.12✓ EMC filter for vehicles sensitive to radio interference during LED installation
✓ Compatible with the most common lamp sockets
✓ Plug & Play – easily connects between the light and the vehicle’s original connector -
Adapter for trailer with LEDFrom €34.90 €27.92✓ Adapted for trailer with LED lighting
✓ Prevents error messages in cars that have Canbus light monitoring
✓ Choose between 13/7 or 13/13 pole