Relay and cables

✓ Pro relay harness for LED bar
✓ With 1 x ATP / DTP connector
✓ Designed for 12V

✓ Pro DT relay wiring for aux. lights, bars and work lights
✓ Controlled via input cable from the high beam
✓ 12V with waterproof fuse holder

✓ Programmable control panel with remote (12-24V)
✓ Commander relay box with 8 individual outputs
✓ Control with app or RGB backlight controller

✓ Reads the car's digital high beam signal on cars with Xenon / LED
✓ Gives control signal to the supplied relay and eventual DT-branching
✓ Contactless reader can be bought as an accessory

✓ Quick adapter for very easy connection of our DT relay kit
✓ No damage to the car's original cabling
✓ Intended for cars with halogen head lights

✓ Waterproof IP67 rated joint point
✓ Resistant to salt, oil, antifreeze, miscellaneous chemicals
✓ With silicone sealant

✔ DT-adapter 2 pole to 4 pole
✔ For use with 2-pole relay
✔ Adapter for connecting DT relay cable

✓ DT adapter 2 pole to 3 pole
✓ For use with 2-pole relay
✓ Adapter for connecting DT relay cable

✓ Connection cable for LED-converted auxiliary lamp (D2Y)
✓ DT connector to turn on the DT relay kit
✓ Specially developed for retrofitted LED in NBB 225

✓ 3 meter extension cable for LEDSON Plow Light

✓ DT adapter 2 pole to 3 pole
✓ For use with 2-pole relay
✓ Adapter for connecting DT relay cable to LEDSON Pollux9

✓ 100 cm extension cable
✓ Mounted AMP-contacts on one end
✓ Works on both 24V and 12V

✓ Relay set for 3 lamps, 12V
✓ Maximum total load: 40 A
✓ Cable length: 2000 mm

✓ Relay set for extra light (two lamps), 12V
✓ Maximum total load: 30 A
✓ Cable length: 2000 mm

✓ 100 cm long
✓ Sold individually
✓ Pre-mounted contacts

✓ 50 cm long
✓ Sold individually
✓ Pre-mounted contacts

✓ Avoid interference with the car's radio reception
✓ No splicing or soldering is required
✓ Plug 'n' Play

✓ Warning cancels for cars with light monitoring
✓ Intended for xenon kit
✓ Only for 12V

✓ XBB Dongle and XBB Power Unit
✓ No damage to the car's original cabling
✓ Wireless communication via Bluetooth

✓ Deutsch DT contact
✓ Complete kit
✓ Choose between 2/3-pole male/female

✓ Accessories for XBB OBDII Dongle / Powerunit
✓ Branch cabling for two units
✓ Extension cable or DT relay cable

✓ Easily attrive the signal from your high beam and parking light
✓ To use with DT relay kit or the position light on your auxiliary light
✓ Select your car model from the list

✓ When you want to control auxiliary light with the main beam
✓ For cars with combined high and dipped Xenon or LED
✓ Only for 12V

✓ To control auxiliary lights with the high beam
✓ For newer vehicles (eg with adaptive LED headlights)
✓ Fast, safe & inductive (contactless)

✓ DT extension cable with male / female
✓ 40 cm long
✓ For LED bars, auxiliary lights and work lights

✓ Deutsch DT branch, branch outlet
✓ 1 male to 2 females, length 40 + 10 cm
✓ Intended for 2-pole LED bars, auxiliary lights, work lights, etc.

✓ DT cable long 2-pole female
✓ 230 mm total length
✓ For LED bars, auxiliary lights and work lights

✓ Relay for auxiliary light
✓ 40 A fuse (included)
✓ Only for 12 V

✓ High beam relay for CAN controlled digital headlights
✓ Fits Audi, BMW, Mercedes, Volkswagen (see details)
✓ Make sure your aux light light works as supposed to

✓ Quick installation
✓ No damage on the car's electrical system
✓ Powers up to three auxiliary lamps (3x10A)

NOTE: Estimated delivery autumn 2023

We recommend the XBB Dongle complete kit instead.

✓ Relay set for xenon conversion intended for three auxiliary lights
✓ 12V and max 40A
✓ 160 cm cable

✓ Relay set for xenon conversion intended for two auxiliary lights
✓ 12V and max 40A
✓ 160 cm cable

✓ Refers to xenon-converted auxiliary light for power supply of the ballast
✓ Especially good when the auxiliary lights are far away from the contacts
✓ 20 A fuse included

✓ Relay set for three lamps, 12V
✓ Maximum total load: 40 A
✓ Cable length: 2000 mm

✓ Easy to install your LED-bar or LED auxiliary light
✓ DT-contact and ON/OFF-switch
✓ Works well with CANBUS-systems