Relay and cables

✓ Ledson Connect - super easy connection
✓ With DT cable (2,4 or 6-pole)
✓ Linkable for additional auxiliary lights/bars

✓ Pro DT connector for auxiliary light / work light
✓ Controlled via input cable from the high beam
✓ Waterproof fuse holder

✓ ATP relay with button (2 x ATP contacts)
✓ For LEDSON LED bars above 150W
✓ Also for cars with Canbus

✓ XBB Dongle and XBB Power Unit
✓ No damage to the car's original cabling
✓ Wireless communication via Bluetooth

✓ Programmable control panel with remote (12-24V)
✓ Commander Gen2 relay box with 8 individual outputs
✓ Control with app or RGB backlight controller

✓ Reads the car's digital high beam signal on cars with Xenon / LED
✓ Gives control signal to the supplied relay and eventual DT-branching
✓ Contactless reader can be bought as an accessory

✓ Quick adapter for very easy connection of our DT relay kit
✓ No damage to the car's original cabling
✓ Intended for cars with halogen head lights

✓ Waterproof IP67 rated joint point
✓ Resistant to salt, oil, antifreeze, miscellaneous chemicals
✓ With silicone sealant

✓ DT adapter 2 pole to 3 pole
✓ For use with 2-pole relay
✓ Adapter for connecting DT relay cable

✓ DT adapter 2 pole to 3 pole
✓ For use with 2-pole relay
✓ Adapter for connecting DT relay cable to LEDSON Pollux9

✓ Extra strong EMC-filter
✓ Removes disturbances caused by LED light sources
✓ 12 months warranty

✓ 2 meters wiring to Lightswitch
✓ Including fuse holder with 30A fuse and ring sleeves
✓ Power supply from battery / plus to XBB

✓ Deutsch DT contact
✓ Complete kit
✓ Choose between 2/3/4-pole male/female

✓ Accessories for XBB OBDII Dongle / Powerunit
✓ Branch cabling for two units
✓ Extension cable or DT relay cable

✓ Easily attrive the signal from your high beam and parking light
✓ To use with DT relay kit or the position light on your auxiliary light
✓ Select your car model from the list

✓ EMC-filter
✓ Removes disturbances caused by LED light sources
✓ 12 months warranty

✓ When you want to control auxiliary light with the main beam
✓ For cars with combined high and dipped Xenon or LED
✓ Only for 12V

✓ To control auxiliary lights with the high beam
✓ For newer vehicles (eg with adaptive LED headlights)
✓ Fast, safe & inductive (contactless)

✓ DT extension cable with male / female
✓ 40 cm long
✓ For LED bars, auxiliary lights and work lights

✓ Deutsch DT branch, branch outlet
✓ 1 male to 2 females, length 40 + 10 cm
✓ Intended for 2-pole LED bars, auxiliary lights, work lights, etc.

✓ DT cable long 2-pole female
✓ 230 mm total length
✓ For LED bars, auxiliary lights and work lights

✓ Relay for auxiliary light
✓ 40 A fuse (included)
✓ Only for 12 V

✓ High beam relay for CAN controlled digital headlights
✓ Fits Audi, BMW, Mercedes, Volkswagen (see details)
✓ Make sure your aux light light works as supposed to

✓ Quick installation
✓ No damage on the car's electrical system
✓ Powers up to three auxiliary lamps (3x10A)

✓ Easy to install your LED-bar or LED auxiliary light
✓ DT-contact and ON/OFF-switch
✓ Works well with CANBUS-systems