Connect cable harness for LED auxiliary lights 12V

With Ledson Connect, you get a simple and smooth connection of LED bars, auxiliary lights and work lights. It has never been easier and saves a lot of time during mounting and installation! The installation can be done with direct connection or with XBB.

The harness is available with one DT connector and three DT connectors as well as for auxiliary lights/bars with a connector that is 2-pin, 4-pin and 6-pin (2-pin is with one function only (high beam), 4-pin for selectable position light and 6-pin for selectable position light and built-in strobe light). There is also a cable harness with 2-pin DTP/ATP connector (former item no. 7800301, new item no. 7801010). The cables from the harness to the contacts are a full two meters long and can also be extended if necessary with a DT extension cable.

Ledson Connect Power Switch Cable gives you the option of being able to choose when you want your auxiliary lights or your LED bar to be turned on and off by, for example, the high beam or not. This control can help in foggy conditions or heavy snowfall. The switch wiring comes with pre-sealed AMP connectors that enable easy plug-and-play to the Ledson Connect relay harness.

With the Ledson Connect Cable Harness ATP/DTP, equipped with an ATP connector capable of handling up to 25A/300W, you won't be limited. You can connect more and stronger lights with the same ease as with the regular Connect cables. Additionally, the Connect Pro cable comes with a generous 3m cable length

The Ledson Connect Reverse Light Wiring Harness provides easy connection for two additional reverse lights. The 3.9-meter-long power supply cable easily reaches from your reverse lights to the battery on most vehicles. The reverse light harness has two DT connectors and an input for control from existing reverse lights. You can easily replace the relay with an XBB Dongle to further simplify connection and control.

The Ledson Connect XBB Control Harness is compatible with 7801002, 7801003, 7801004, 7801005, 7801006, 7801007, and is used when the load from the extra lights connected to the Ledson Connect cable sets exceeds what XBB can handle. For this additional cable harness, a separate XBB unit is purchased (7800221).

The wiring harness can be combined with quick adapter for relay kit (33460350) for cars with halogen high beams, Cannect M8 highbeam (7800240, 7800243) or XBB Dongle (7800221) for cars with LED or xenon high beams.

The cables can be easily connected to each other and can then be expanded with more connectors if you want to install more than three auxiliary lights or LED bars.

Each DT output manages a current consumption of max 13A and the wiring is intended for use in passenger cars (12V). NOTE! Wiring with three DT connections can handle a maximum of 300W in total

Manualer

• For 2-pole 7801002 & 7801003
• For 4-pole 7801004 & 7801005
• For 6-pole 7801006 & 7801007
• For DTP 2-pole 7801010
• For XBB control harness 7801011