Nexus bendable warning light

Ledson Nexus is a bendable warning LED light which has an effective resistance to impact and corrosion. It can bend backwards up to 30° for mounting on curved surfaces but can also be mounted on flat surfaces. Nexus has improved anti–yellowing and antioxidant lens design compared to traditional warning lights. Mounted with 3M VHB tape or screw mounted with the bezel.

Specifications:

• Manufactured in a silicone material, bendable backwards up to 30° for mounting on curved surfaces    
• Can also be flat mounted, screwed with the supplied bezel
• 3M VHT tape is pre-mounted on the back of the strobe light
• 19 different flash patterns    
• ECE R65 class 1, ECE R10    
• Can be connected to several Nexus and cause them to flash in sync or alternately with other Nexus strobe lights  
• Cable length: 2,5m 
• Voltage: DC 10-33V
• Max power: 10W
• 6 x 3W LED    
• IP69K (water-/ & dustproof)
• Operating temperature: -30°C to +70°C

Measures (without bezel):

• Width: 100 mm
• Height 23 mm
• Depth 10 mm

Measures (with bezel):

• Width: 113 mm
• Height : 26 mm
• Depth : 11 mm
• Hole spacing (cc): 105 mm

NOTE: Make sure the surface is 100% clean from wax residue etc before mounting with the adhesive tape. If it will be mounted on a curved surface then carefully bend the warning light backwards so that it maintains a slightly bent shape before mounting.