Phoenix+ 32" LED bar package for Scania Next Gen

Ledson Phoenix 32" with strobe light & position light LED bar kit for Scania Next Generation, model year 2016 and newer. With our custom designed mounting kit, you get a quick and cost-effective installation as well as an optional mounting position for the LED bar. Mount it either hidden behind the front grille or let the bar protrude through, either at the top or bottom grille.

Included in the package: 

• 32" Phoenix+ LED- bar (part no 33305335)
• Custom made mounting for Scania Next Generation
• Screws, nuts and installation instructions

Phoenix+ 32" (798 mm)

Auxiliary light and warning light in one unit with this multifunctional Ledson bar! With the strobelight function you save both valuable installation time and get a much cleaner look!

Phoenix+ is E-approved as auxiliary light according to ECE R112 and has approved strobelight (ECE R65). It´s also equipped with xenon white position lights, which is optional to connect.

You get awesome strength in the high beam and a safer job on the road!

Characteristics:

• Driving Beam beam pattern (wide and oblong)
• E-marked ECE R112 (ref. 50) - Read more about UNECE regulations here
• ECE R65 / R7 / R10 (EMC-rated)
• Range: 449 m (1 lux)
• Lumen: 13860 lm (theoretical), 5583 lm (actual)
• Color temperature 5700K (cold white)
• Strobelight: Orange (ECE R65)
• Position light: Xenon white

Technical data:

• 165 W (33 x OSRAM CSHP LED)
• IP69K: withstands hot water under pressure - Read more about IP rating here
• Aluminum housing and polycarbonate lens
• 4-pin DT connector (included)
• Voltage: 10-30V

Dimensions & weight (excl. Brackets):

• Width: 798 mm
• Height: 40 mm
• Depth: 54 mm (excl. Bracket)
• Weight: 2100 grams

Cable colors:

• Green: Flash function
• Gray: White position light

NOTE: The DT connector must not be cut as it entails an increased risk of moisture damage and the warranty then ceases to apply. DT connector (male) with joint included with the product.