Driver for Glowstrip (12V and 2xAA)

Cig plug:

Driver for Glowstrip, provides power via the cig plug in the car. Only for 12V (passenger cars). One Driver per Glowstrip, if several Glowstrips are required on the same driver - expand with a 2-way or 4-way connector. Recommended total length for the Glow Strip is max 5 meters per driver, so the brightness is not perceived as too weak (see more info at the bottom).

Measurements on wires:

Length of cord out to Glowstrip: 50 cm
Length of cord to power (plus / minus): 50 cm

Dimensions of driver:

• Length: 39 mm (incl. Hole for possible driver lock)
• Width: 18 mm
• Height: 22 mm

Loose wiring (without cig plug):

Glowstrip driver (without cig plug, only plus and minus cable). Can be connected to eg the car's battery or other suitable power source from the car (only for 12 V). One Driver per Glowstrip, more Glowstrips are desired on the same Driver - expand with a 2-way or 4-way connection. The recommended total length for the Glowstrip is a maximum of 5 meters per Driver so that the brightness is not perceived as too weak (see more info at the bottom).

Battery powered (2xAA):

Now you can light up your Glowstrip anywhere! Battery powered and portable driver for the Glowstrip. Powered by two AA batteries (not included).

Perfect if you do not have a solid power source or do not want cables / use the cig plug in the vehicle.

Specifications:

• Powered by 2 x AA-batteries (not included)
• Cable length: 10 cm
• Button to set a solid light or slow / fast flashing light

Recommended Max Length per Driver

We recommend connecting a maximum of 5 m of Glowstrip on a driver, as light intensity may otherwise become too weak. If you wish to connect more than 5 meters, it is our recommendation that you also increase the number of drivers.

NOTE: When the Driver is powered up, it emits a weak, high-frequency sound. This is completely normal and nothing that affects its function.