Pollux9+ Gen3 Trinity D&S LED auxiliary package (12 V)

Trinity D&S = The impressive power of both Pollux9+ Gen3 Driving beam and Spot

This package contains three of our popular Pollux9+ Third Generation (two with Driving beam and one with Spot), a practical powder coated steel holder, wiring (1 x Ledson Connect) and locking strip for the license plate.

Pollux9+ Gen3 is a distinctive and large 9" auxiliary light in modern black for those who want something tougher than the traditional look of the auxiliary lights today. Compared to the Pollux9, the Pollux9+ allow you to choose between xenon white or yellow-orange colour for your position light. Comes with a 36 month warranty.

The following is included:

• 2 x Pollux9+ Gen3 Driving Beam auxiliary light (artno. 33491236)
• 1 x Pollux9+ Gen3 Spot Beam auxiliary light (artno. 33491237)
• 1 x Holder in powder coated steel (artno 3346052)
• 1 x Ledson Connect with three DT connectors (artno. 7801016)
• 1 x Locking strip for numbers plate (artno 960202)

Plus: 

• Bolts and screws to secure the auxiliary light with either one or two attachment points
• DT connectors (4-pole) - one for each extra light
• Installation instructions

Pulse-Controlled Powerboost - It Doesn't Get Smoother Than This

Pollux9+ Gen3 comes equipped with Ledson Powerboost—an extra power mode for those moments when you need (or simply want) maximum brightness. A simple flick of the high beam lever activates this impressive brightness, allowing you to easily adjust the auxiliary light's output according to your needs. With the new generation of Powerboost from Ledson, you can seamlessly switch modes using the high beam flash in just a few easy steps, as shown here. Note: Your auxiliary light is delivered in E-approved mode. Please follow the instructions to activate Powerboost mode.

Switch to Powerboost mode with "10+10+5"

This is done most easily with the 'light switch' when the light switch is in off or parking light mode.

1. Turn on the auxiliary light for about 10 seconds (between 7-13 seconds)
2. Flash the auxiliary light rapidly 10 times (within 10 seconds)
3. On the eleventh flash, hold the light on and after about 5 seconds the Powerboost function will automatically switch on or off.

TIR reflectors

TIR stands for Total Inner Reflection and means that all light is effectively reflected and directed before it is sent out from the reflector. The spill light (the light that is not directed but which disappears "unfocused" from the light without making any real use) is minimized. A traditional reflector directs and focuses most of the light but far from everything.

In summary, you get more efficient light on the road and take full advantage of every LED on the auxiliary light with the TIR reflectors!

Driving Beam light image

Driving beams reflectors are all computer generated and manufactured to provide a similar light image as combo but more consistent and within the limits of what is legal. It mimics and enhances the car's existing headlight and light image.

Spot light image

A spot beam has a focused beam of light straight ahead to bring light further down the road in the maximum possible way. This is ideal if you drive a lot of highway or on major roads. Also known as auxiliary beam image.

Specifications (per light):

• E-marked (ref. 37.5 for Driving Beam, ref. 50 for Spot Beam), ECE R112 / R10 / R7 (white position light) - Learn more about E-marks here
• Equipped with pulse-controlled Powerboost
• EMC secured (does not interfere with radio signals)
• With position light (4 pcs LED) yellow-orange or xenon white (connect the color you prefer)
• "Driving beam" light pattern (33491236) or "Spot Beam" light pattern (33491237)
• Driving Beam Range: 407 m (1 lux), Powerboost: 659 m (1 lux)
• Spot Beam Range: 493 m (1 lux), Powerboost: 805 m (1 lux)
• 4200 lumens (theoretical), 3500 lumens (actual)
• Powerboost 13000 lumens (theoretical), 10500 lumens (actual)
• Color temperature 5000K (Neutral White)
• TIR optical system (Total Inner Reflection)
• Pressure equalization membrane
• 36-month warranty

Technical data (per light):

• 120W (12 x 10W LED)
• Nominal power 92.4 W
• IP68 & IP69K (water/dustproof)
• DT connector (4-pin) included
• Electronic heat management
• Voltage 9-36 V
• Load 3.2 A @ 12 V and 1.6 A @ 24 V
• Load Powerboost 9.8 A @ 12 V and 4.6 A @ 24 V

Measurement & weight (per light):

• Width: 218 mm
• Height: 234,5 mm (inkl fäste)
• Depth: 68,5 mm
• Weight: 1,9 kg

Installation instructions for cables (detailed instructions included with the product):

• Red: Auxiliary light (+)
• Black: Auxiliary light / Position light (- ground)
• White: Position light (+) white light
• Yellow: Position light (+) yellow-orange light

NOTE: The DT connector must not be cut, as this increases the risk of moisture damage and the warranty will cease to apply.