Orion10+ Gen2 Trinity LED auxiliary light (12 V)

Trinity = The light and design of Orion10+ Gen2 (times three!)

This kit contain three pieces of our most popular auxiliary light Orion10+ Gen2 LED, a universal holder, locking strip and the wiring you need to install the lights (to either light up with the high beam or by pushing a separate button.  

With its futuristic design, it's hard not to get caught by the look of Ledson Orion10+ Gen2... We know how important it is with an auxiliary light that not only performs above expectations, but is also nice to look at. 

Do you want to own something that transforms you into an eye catcher? Something that raises your vehicle's status in the car world? But that also dutifully pushes away the darkness in the late evenings and makes your driving much safer? In that case is the kit with Ledson Orion10+ Gen2 LED auxiliary light is perfect for you!

Notice our quick connection with ready contacts, for an even easier and quicker installation. No damage to the car's original cabling (no power thief needed).

The kit contain: 

• 3 x Orion10+ Gen2 LED auxiliary light (part 33490427)
• 1 x Universal holder for three auxiliary light (part 3346075)
• 1 x Ledson Connect relay wiring 3 x DT (part 7801005)
• 1 x Locking strip for number plate (part 960202)

Also: 

• Bolts and screws to attach your auxiliary lights
• Installation guide

Driving Beam light image

Driving beams reflectors are all computer generated and manufactured to provide a similar light image as combo but more consistent and within the limits of what is legal. It mimics and enhances the car's existing headlight and light image.

Features (per light):

• With position light, yellow-orange or xenon white (use the color you desire)
• Driving beam light that mimics and reinforces the vehicle's regular light
• E-marked E9 (Ref. 37,5), ECE R112 / R10 / R7 (white position light)
• Range: 850 m (0,25 lux), 444 m (1 lux)
• EMC secured (does not disrupt the radio)
• 10000 lumen (raw), 8500 lumen (effective)
• Cold white light (6000 K)
• ETM (Electronic Thermal Management) - adjusts the diode's strength depending on how hot they are for optimum life
• Side reflecting optical system
• Pressure relief membrane
• Aluminum alloy heat-sink
• Adjustable bracket in stainless steel
• Lexan polycarbonate front cover
• 24 month warranty

Technical data (per light):

• 100W (4 x 25W LED)
• IP69K (water/dust proof)
• Voltage: 9-36 V
• Load: 6,8 A @ 12 V and 3,4 A @ 24 V

Measurement (per light):

• Width: 247 mm
• Height: 141 mm (176 mm incl mounting)
• Depth: 92 mm
• Weight: 1,82 kg

Cable installation (detailed installation instructions included):

• Red: Light (+)
• Black: Light / Position light (- ground)
• White: Position light (+)
• Yellow: Position light (+)

OBS: The DT-connector must not be cut since it increases the risk of water and/or damp damage. If the connector has been cut the guarantee does no longer apply.