Orion10+ Gen2 Strobe Quadrinity LED auxiliary package for Volvo FH

Quadrinity = The brightness and design of Orion10+ Gen2 Strobe (times 4!)

This package contains four of our popular Orion10+ Gen2 Strobe LED auxiliary lights, a practical holder in powder-coated steel and stabilizers for the auxiliary lights.

With its deliciously futuristic design, it's hard not to keep your eyes on the Ledson Orion10+ Gen2 Strobe... We know how important it is to have an Auxiliary light that not only shines beyond expectations, but is also really nice to look at!

Do you wish to own something that turns you into an eye-catcher? That raises your vehicle's status in the automotive world? But also dutifully pushes away the darkness in the evenings and makes your driving significantly safer? This kit with Ledson Orion10+Gen2 Strobe LED Auxiliary might be perfect for you!

Following is included: 

• 4 Orion10+ Gen2 Strobe Auxiliary light (Driving Beam)
• Custom-made mounting kit Scania Next Gen
• Bolts and screws for attaching your auxiliary lights
• DT connectors (4-pin) - one for each auxiliary light
• Installation instructions

With its futuristic design it's hard not to get caught by the look of Ledson Orion10+ Gen2 Strobe... We know how important it is with an auxiliary light that not only performs above expectations, but is also nice to look at. Do you want to own something that transforms you into an eye catcher? Something that raises your vehicle's status in the car world? But that also dutifully pushes away the darkness in the late evenings and makes your driving much safer?

Brightness that counts

Of course, we have ensured that an auxiliary light that owns tomorrow's design also has large amounts of light! 8500 actual lumens and 1 lux brightness at 450 meters and 0.25 lux brightness at 850 meters (per auxiliary light) gives you the visibility ahead on the road that you previously lacked!

A long list of technical, but important, features

In addition to its beautiful design, the auxiliary light is also equipped with a stylish position light that can be set between xenon white and amber: you choose which one you want. If you get tired of one color with time, you just switch to the other one. Orion10+ Gen2 Strobe has a range of E-markings ECE R112 / R10 / R7, 8500 actual lumens, 6000K light temperature for a modern look, ETM, EMC, side reflective optical system and more ....with great performance, Orion10+ Gen2 Strobe leaves you with that must-have-feeling!

Thanks to its size and design, Ledson Orion10+ Gen2 Strobe fits really nicely mounted on all types of vehicles.

Driving Beam light image

Driving beams reflectors are all computer generated and manufactured to provide a similar light image as combo but more consistent and within the limits of what is legal. It mimics and enhances the car's existing headlight and light image.

Flash patterns:

• Single flash (ECE R65)
• Double flash
• Triple flash
• Quadruple flash
• Continuous hyper flash

Specifications (per auxiliary light):

• Strobe light (4 pcs orange LED) with 5 different strobe patterns
• Position light, yellow-orange or xenon white (select the color you desire)
• Driving beam light that mimics and reinforces the vehicle's regular light
• E-marked E9 (Ref. 37,5), ECE R112 / R65 / R10 / R7 (white position light) - Read more about UNECE regulations here
• Range: 850 m (0,25 lux), 444 m (1 lux)
• EMC secured (does not disrupt the radio)
• 10000 lumen (raw), 8500 lumen (effective)
• Cold white light (6000 K)
• ETM (Electronic Thermal Management) - adjusts the diode's strength depending on how hot they are for optimum life
• Side reflecting optical system
• Pressure relief membrane
• Aluminum alloy heat-sink
• Adjustable bracket in stainless steel
• Lexan polycarbonate front cover
• 36 month warranty

Technical data (per auxiliary light):

• 100W (4 x 25W LED)
• IP69K (water/dust-proof)
• DT connector / DT-adapter 2-4 pin supplied with the product
• Voltage 9-36 V
• Load 6,8 A @ 12 V and 3,4 A @ 24 V

Measurement & weight (per auxiliary light):

• Width: 247 mm
• Height: 141 mm (176 mm incl mounting)
• Depth: 92 mm
• Weight: 1,82 kg

NOTE: The DT connector must not be cut as this results in an increased risk of moisture damage and the warranty then ceases to apply.