LEDSON DME LED bar 10" 48W (V2.0, E-mark, Driving Beam)

NEW! LEDSON DME bar (E-marked, E1 reference number 20)

What makes this bar unique is that it can be double-mounted (DME) together with another bar of the same type (using assembly no. 33309003 to screw the ramps firmly together). In this way, two DM bars can be mounted next to each other, with discrete size, but with double the power compared to a single bar. In some countries (Norway / Finland), it is recommended that LED bars are mounted in pairs and have a reference value below a specific value, for this market the LEDSON DME bar is perfectly suited! Of course, it is possible to assemble more than two DME ramps if desired, but don´t forget that you need additional mounting sets and DT connectors (triple mounting requires two mounting sets and DT cables with 3 x DT connectors)

E-approved 48W light bar from LEDSON with driving beam / euro beam light image that provides wide and elongated light. 2564 actual lumen with a modern xenon white color temperature of 6000K. The light beam shoots 600 m away at 0.25 lux (300 m at 1 lux).

Driving Beam light

Driving Beam reflectors are computer calculated and manufactured to provide a similar light image as the combo light but more consistent and within the limits of what is legal. It mimics and enhances the car's existing headlight and light image.

V 2.0 means that the bar is delivered with dual mounting options in black:

• Side-mounted legs
• Centered mount that runs along the entire bar

What's needed?

• DT relay kit (Please note that for dual mounting, you need a DT relay with 2 pcs DT no. 3346006): We strongly recommend using our DT relay with original connectors to connect the LED bar to the vehicle. You can then choose between controlling the bar with a button or switching it on to the main beam (the bar lights on and off automatically when the main light is on and off, as most people prefer). There is also a fuse between ethe xternal light and the battery to prevent possible damage to battery or other equipment belonging to the car. Detailed installation instructions are included with the DT relay.

• Mounting on the vehicle: Can be mounted directly on the vehicle or with the help of a number plate holder. We recommend part no. 3346053 for a flexible assembly. 

Features:

• E-marked (E1 20 4635 HL 5748) - Read more about UNECE regulations here
• Black side-mounted legs and black centered bracket
• Driving beam light image (enhances the car's existing light image)
• 2564 actual lumen
• Range: 600m (0,25 lux) och 300m (1 lux)
• DME (Dual Mount Enabled) - Double mounting possible between two bars with mounting kit (Part No. 33309003)
• Color temperature: 6000K (xenon white/cold white)

Technical data:

• 16 x 3W Cree-diodes
• Total 48W
• Protecion class IP67 (dust and waterproof)
• Aluminum housing
• Lens in polycarbonate
• Pressure equalization membrane
• EMC secured
• Load:  3,34 A at 12 V and 1,67 A at 24 V
• DT connector included
• Works at 10 - 30 V

Dimensions & weight:

• Width: 225 mm
• Depth: 55 mm (exkl. brackets)
• Height: 77 mm
• Weight: 1,08 kg