Helix reverse light with warning light

Ledson Helix is ​​an E-marked reverse light which, in addition to lighting up the area properly behind you, also has an approved warning light. With two functions in one light, you save space on the vehicle and simplify your installation!

Helix can be installed standing, hanging or with recessed mounting.

Characteristics:

• E-marked reverse light with approved warning light
• ECE R23, R65, R10, CISPR25 class 3
• Comes with bracket for standing / hanging & recessed mounting
• Flood beam pattern: 80° and 60°
• Lumen: 3200 (theoretical), 2700 (actual)
• Side reflecting optical system
• ETM (Electronic Thermal Management)
• Cold white light (6000K)

Technical data:

• 4 x 8 W LED (reverse light) + 4 x 3 W LED (warning light)
• Load 1,9 A at 12 V and 1 A at 24 V
• IP69K (water-/and dust proof)
• Voltage 9-36 V
• DT connector included

Measure:

• Width: 164 mm
• Height: 41 mm excl bracket
• Depth: 61 mm

NOTE: The DT connector must not be cut as it involves an increased risk of moisture damage and the guarantee then expires.