Emblem lighting for Mercedes Actros (YELLOW)

Yellow light source for the big star at the front of Mercedes Actros trucks giving you the big yellow light. Replaces the original white light source.

To mount this light source, first divide the original logo, replace light sources and then finish by gluing the parts again. It takes about 30 minutes.

Instructions (follow the pictures above):

1. PICTURE A: o 'part is assembled with the logo using the three plastic pieces bent out of the light. Straighten the plastic, then pull the two halves apart.
2. PICTURE B: The clear plastic and white plastic that the body consists of are glued with black glue. You can use a knife and screwdriver to gently separate the glue (be careful).
3. Once done, you can easily remove the original source and insert the yellow one. Before gluing the parts together again, remove the old adhesive. The O'section and logo are assembled in the same way as you separated them.

Note that the star with light is accessories available from Mercedes. Therefore, if you do not have light in the star, you can not use this product.