ECE-approved LED turn signal with mouting holes (smoked glass, 12V)

Nimble, ECE-approved turn signal with 18 LEDs. Mounting holes with two screws supplied.
ECE-approval only as a rear turn signal, but can also be used as a complementary front turn signal. The lamp is completely sealed, and can therefor be mounted anywhere on the car as long as UNECE's guidelines are adhered to. 

The lamp is easily connected to existing wiring through the one meter long cable.

The lamp is available with clear or smoke-coloured glass. The outer size is 25x13x113 mm (HxDxW) and the cutout needs to be 106x19 mm (WxH).

Please note: If you only add the turn signal lamp and still use the original flasher bulb as well, no extra resistor is needed. However, if you replace the pre-existing turn signal bulb with the LED-lamp, you're going to need an external resistor to avoid rapid flashing. We recommend SKU 1221.

The LED-lamp is originally designed for american cars that has no legal turn signal options in Sweden, but the lamp can be used on any car.

Supplied individually, only for cars (9-16V).