Orion10+ Gen2 Quadrinity LED-extraljuspaket (12 V)

Quadrinity = The brightness and design of Orion10+ Gen2 (times 4!)

This package contains four of our popular Orion10+ 2nd Generation LED auxiliary lights, a practical holder in powder-coated steel, locking strip for your license plate and the wiring required for installation (so you can control your auxiliary light either so that it turns on together with the main beam or via a separate button).
 

"The brightest oval headlight" in the magazine "Trailer"!
The brightest of the tested oval headlights. Unique with a stylish design with two vertical decorative light surfaces that provide a neat assembly with several lamps mounted low. Good high beam character, which gives a good beam pattern that reaches far if several are mounted together.

With its deliciously futuristic design, it's hard not to keep your eyes on the Ledson Orion10+ Gen2... We know how important it is to have an Auxiliary light that not only shines beyond expectations, but is also really nice to look at!

Do you wish to own something that turns you into an eye-catcher? That raises your vehicle's status in the automotive world? But also dutifully pushes away the darkness in the evenings and makes your driving significantly safer? This kit with Ledson10+ LED Auxiliary might be perfect for you!

TIP: Also see our quick coupling for relay kit with finished connectors, no damage to the car's original cabling (no power thief needed). Quick and easy installation!

Following is included in the kit: 

• 4 x Orion10+ Gen2 LED-auxiliary Light (artnr 33490427)
• 1 x Auxiliary lamp mounting plate (artnr 3346054)
• 1 x Ledson Connect with three DT-contacts (artnr 7801005)
• 1 x Ledson Connect with one DT-contact (artnr 7801004)
• 1 x locking strip for license plate (artnr 960202)

Extras: 

• Bolts and screws to secure the auxiliary light with either one or two attachment points
• DT connectors (4-pole) - one for each extra light
• Installation instructions

Driving Beam- beam pattern

Driving beams reflectors are all computer generated and manufactured to provide a similar light image as combo but more consistent and within the limits of what is legal. It mimics and enhances the car's existing headlight and light image.

Stone chip protection and snow filter

Our Orion10+ Gen2 is already equipped with a durable lens, but if you really care about your auxiliary lights having a long life, free from stone chips and scratches, we recommend our stone chip protectors. A cheap and easy way to give your lights an extra layer of protection!

Specifications (per auxiliary light):

• With position light, yellow-orange or xenon white (connect the color you want)
• Driving beam beam pattern that mimics and enhances the vehicle's ordinary beam pattern
• E-marked: E9 (Ref. 37,5), ECE R112 / R10 / R7 (white position light)
• Range: 850 m (0,25 lux), 444 m (1 lux)
• EMC secured
• 10000 lumen (raw), 8500 lumen (actual)
• Cold white light (6000 K)
• ETM (Electronic Thermal Management) - adjusts the strength of the diodes depending on how hot they are for optimal lifespan
• Side reflective optical system
• Pressure equalization membrane
• Aluminum heatsink
• Adjustable bracket in stainless steel
• Lexan polycarbonate front cover
• 24 month warranty

Technical data (per auxiliary light):

• 100W (4 x 25W LED)
• IP69K (water and dust proof)
• DT connector 4 pin supplied
• Voltage: 9-36 V
• Main light load: 4A @ 12V and 2A @ 24V

Measurements (per auxiliary light):

• Width: 247 mm
• Height: 141 mm (176 mm incl bracket)
• Depth: 92 mm
• Weight: 1,82 kg
• Cable length: 650 mm

Installation instructions for cables (detailed instructions included with the product):

• Red: Auxiliary light (+)
• Black: Auxiliary light / Position light (- ground)
• White: Position light (+) white light
• Yellow: Position light (+) yellow-orange light

NOTE: The DT connector must not be cut as this results in an increased risk of moisture damage and the warranty then ceases to apply.