Complete Apollo C LED bar kit (12V)

The following is included in the package:

• 1 x 21" Apollo C LED bar (part 33501572)
• 1 x custom made holder (part 3346057)
• 1 x Ledson Connect (part 7801002)
• 1 x locking strip (part 960201)

Apollo C LED bar with curved design

Apollo C delivers plenty of light with an astonishing design!

Curved design (C = Curved) with Driving Beam light pattern (Drive)

A curved bar often looks more neatly mounted on the vehicle as many cars have a slightly curved front that a curved bar matches nicely.

The Driving Beam "mimics" the vehicle's regular light pattern. You will thus get a similar light scatter to your existing vehicle's dipped- & high beam but amplified.

Features:

• Curved design that matches cars with curved front
• Driving Beam light pattern (wide and oblong)
• E-marked (E9, ref. 45), ECE R112/R10 - Read more about UNECE regulations here
• CISPR25 class 3 (EMC secured)
• 6669 lumen (raw), 3928 lumen (actual)
• Color temperature 6000K (cold white)
• Range 750 m (0,25 lux), 480 m (1 lux)
• Double mounting options

Technical data:

• 105W (15 x 7 W Cree LED)
• IP69K: withstands hot water under pressure
• Aluminum casing and polykarbonate lens
• Side-reflecting optic system
• Electric Thermal Management (ETM)
• 6,63 A at 12 V and 3,61 A at 24 V
• DT connector
• Pressure relief membrane

Supplied:

• Apollo C LED bar
• Side mounted brackets
• Slideable brackets for standing or hanging mount
• Butls and screws 
• DT connector
• Installation manual

Measure & weight:

• Width: 535 mm
• Height: 46 mm
• Depth: 70 mm
• Depth of curved recession: 7 mm
• Weight: 1,56 kg

NOTE: The DT connector must not be cut as it involves an increased risk of moisture damage and the guarantee then expires. DT connector (male) with joints included with the product.