Juno C LED bar 22" 90W (Curved, Driving Beam)

Juno C LED bar with curved design
 

Juno C is the "sequel" to our extremely popular Juno LED bar. C stands for Curved, which means that the bar has a curved design. This makes it even more attractive on vehicles that have a curved front in addition to having 30 m extra range at 1 lux brightness!

Curved design (C = Curved) with Driving Beam light pattern (Drive)

A curved bar often looks more neatly mounted on the vehicle as many cars have a slightly curved front that a curved bar matches nicely.

The Driving Beam "mimics" the vehicle's regular light pattern. You will thus get a similar light scatter to your existing vehicle's dipped- & high beam but amplified.

What more is needed?

• Ledson Connect: We strongly recommend using our Ledson Connect with original connection to connect the LED bar to the vehicle. You can then choose between controlling the bar with a button (optional, see 7801009) or switching it on with the main beam (the bar lights up and goes off automatically when the main light is on and off, as most people prefer). There is also a fuse between the bar and battery to prevent possible damage to battery and other equipment and when using XBB, it can be plugged directly into the Connect.
  Detailed installation instructions are included with the DT relay.
• Mounting on the vehicle: Can be mounted directly on the vehicle (drill in a suitable place) or a little smoother with the help of a license plate holder or pipe bracket. See our various accessories for mounting options.

Features:

• Curved design that matches cars with curved front
• Driving Beam light pattern (wide and oblong)
• E marked (E9, ref. 45), ECE R112/R10 - Read more about UNECE regulations here
• CISPR25 klass 3 (EMC secured)
• 6669 lumen (raw), 3928 lumen (actual)
• Color temperature 5700K (kallvit)
• Range 720 m (0,25 lux), 450 m (1 lux)
• Double mounting options

Tecnical data:

• 90 W (18 x 5 W OSRAM LED)
• IP69K: withstands hot water under pressure
• Aluminum casing and polykarbonate lens
• 6,22 A at 12 V and 2,90 A at 24 V
• DT connector

Supplied:

• Juno C LED bar
• Side mounted brackets
• Slideable brackets for standing or hanging mount
• Bults and screws
• DT connector
• Installation manual

Measure & weight:

• Width: 527 mm
• Height: 35 mm
• Depth: 72 mm
• Weight: 1,2 kg

NOTE: The DT connector must not be cut as it involves an increased risk of moisture damage and the guarantee then expires. DT connector (male) with joints included with the product.